Model research
MDC Robson XTT 15 Year Edition
Configuration: 15 Year Edition dual-fold hardfloor camper trailer (2025 build JP750)
MDC’s exterior photograph of its 15 Year Edition in travel configuration. The clearance offer applies to chassis JP750. The pictured example may differ in its fitted equipment. Manufacturer source ↗
Who it may suit: Families comparing sleeping layouts. Confirm the exact floorplan for your household.
- Advertised price
- $32,990
- Layout
- Queen and double beds at opposite ends · External slide-out kitchen · Ensuite tent and portable toilet
- Berths
- 6Front queen (1,990 × 1,540 mm), rear double (1,990 × 1,300 mm) and convertible club lounge. The end beds can be used together once the camper is unfolded.
- Travel length
- 5,879 mm
- Published tare / ATM
- 1,733 kg / 2,400 kg
Price inclusions and conditions
MDC advertised A$32,990 for VIN LA97ADD19S0MJP750 on 20 November 2026. Freight, registration and government charges are extra. The general model price starts at A$37,990. Confirm that the VIN is available and request the total for your address.
Price observation checked . Price source ↓
Reasons to consider
- The two fold-out beds are each 1,990 mm long, so two pairs can leave their beds made while using the lounge.
Possible compromises
- The rear mattress is 1,300 mm wide, 240 mm narrower than the front. Reaching six sleeping places requires converting the lounge.
Ask the dealer: Can we try both bed ends and see the on-road quote and compliance plate for the camper with VIN ending MJP750?
Check this configuration with the manufacturer ↗
Manufacturer information checked 2026-11-20. Editorially reviewed 2026-11-20. This is not a stock listing, road test or towing assessment.
Read the sources & outstanding checks ↓The details that matter
Open your comparison →- Sleeping places in selected layout
- 6
Source and qualification
MDC states six sleeping places across a front queen, rear double and convertible lounge. Four people can use the two separate end beds while leaving the lounge intact.
MDC | Robson XTT 15 Year Edition dimensions, equipment and individual clearance offer ↗- Overall travel length
- 5,879 mm
Source and qualification
The model specification labels 5,879 mm as the length in closed travel configuration. The canvas and both ends unfold at camp.
MDC | Robson XTT 15 Year Edition dimensions, equipment and individual clearance offer ↗- Published tare
- 1,733 kg
Source and qualification
The register entry for LA97ADD19S0MJP750 records 1,733 kg tare. The model page quotes an approximate 1,740 kg guide figure.
Australian Register of Approved Vehicles | Robson XTT chassis JP750 ↗- Published ATM
- 2,400 kg
Source and qualification
Registered ATM is 2,400 kg for JP750. The register separately gives 2,250 kg GTM.
Australian Register of Approved Vehicles | Robson XTT chassis JP750 ↗MDC’s edition specification also gives a 2,400 kg ATM.
MDC | Robson XTT 15 Year Edition dimensions, equipment and individual clearance offer ↗- Model year
- 2025
Source and qualification
Market Direct Group registered XTT chassis JP750 with a February 2025 build date. The year on this profile describes the vehicle behind the offer.
Australian Register of Approved Vehicles | Robson XTT chassis JP750 ↗A different Australian owner identifies their Robson XTT 15YR Edition as a 2025 purchase. It corroborates the edition’s presence that year. Only the manufacturer’s offer and the register are used for JP750’s price and masses.
Australian owner | another 2025 Robson XTT 15YR Edition purchased new in February ↗- Manufacturer
- MDC
Source and qualification
MDC identifies its Australian Robson XTT dual-fold hardfloor camper.
MDC | Robson XTT 15 Year Edition dimensions, equipment and individual clearance offer ↗- Variant / configuration
- 15 Year Edition dual-fold hardfloor camper trailer (2025 build JP750)
Source and qualification
The 15-year edition table specifies the anniversary decal, electrical system and dual-fold bed layout. Its clearance card identifies VIN LA97ADD19S0MJP750.
MDC | Robson XTT 15 Year Edition dimensions, equipment and individual clearance offer ↗- Advertised price (AUD)
- $32,990
Source and qualification
MDC advertised A$32,990 for VIN LA97ADD19S0MJP750 on 20 November 2026. Freight, registration and government charges are extra. The general model price starts at A$37,990. Confirm that the VIN is available and request the total for your address.
MDC | Robson XTT 15 Year Edition dimensions, equipment and individual clearance offer ↗
MDC advertised A$32,990 for VIN LA97ADD19S0MJP750 on 20 November 2026. Freight, registration and government charges are extra. The general model price starts at A$37,990. Confirm that the VIN is available and request the total for your address.
Published weights can be approximate or configuration dependent. Confirm the actual build, options and compliance plate. Travel length is kept separate from body or internal length.
Layout & equipment
- Queen and double beds at opposite ends
- Convertible club lounge
- External slide-out kitchen
- Ensuite tent and portable toilet
- 200 Ah lithium battery
Source-linked layout checks
These descriptions belong to the cited floorplan or equipment list. Check which options are fitted to the van you inspect.
- Cooking layout
- Outside
MDC specifies a slide-out gas kitchen and sink on its dual-fold Robson XTT.
MDC | Robson XTT 15 Year Edition dimensions, equipment and individual clearance offer ↗
Additional source details
- Published width
- 2,373 mm
- Travel height
- 1,711 mm
- Published towball weight
- Not confirmed
- Sleeping configuration
- Front queen (1,990 × 1,540 mm), rear double (1,990 × 1,300 mm) and convertible club lounge. The end beds can be used together once the camper is unfolded.
Other reviewed MDC models
Explore each exact configuration and its source notes. Models from the same manufacturer can differ in layout, weight and inclusions; these links do not establish equivalent specifications or towing suitability.
Know what you’re comparing
Sources & outstanding checks
Research status: Editorially reviewed. Source checks document what a publisher says; they are not independent measurements.
Configuration caveats and outstanding checks (4)
- The clearance card names chassis JP750. The Australian register gives February 2025 as its build date, 1,733 kg as tare and 2,400 kg as ATM.
- The exterior photograph shows MDC’s anniversary decal and the camper folded for travel. Ask to inspect the actual clearance unit, its condition and its fitted equipment.
- MDC lists a nominal 5.879 m closed length. At camp you need room beyond both ends to unfold the beds, plus room beside the trailer to use the slide-out kitchen and fit the annex.
- MDC gives an approximate towball weight of 145 kg for the model. A measured value for the loaded clearance trailer is unavailable.
- MDC | Robson XTT 15 Year Edition dimensions, equipment and individual clearance offer (opens new tab)
manufacturer · Checked 2026-11-20
- Australian Register of Approved Vehicles | Robson XTT chassis JP750 (opens new tab)
vehicle-register · Checked 2026-11-20
- Australian owner | another 2025 Robson XTT 15YR Edition purchased new in February (opens new tab)
owner-reference · Checked 2026-11-20
View the field-by-field research notes
- Manufacturer
- MDC identifies its Australian Robson XTT dual-fold hardfloor camper. Source ↑
- Variant
- The 15-year edition table specifies the anniversary decal, electrical system and dual-fold bed layout. Its clearance card identifies VIN LA97ADD19S0MJP750. Source ↑
- Model year
- Market Direct Group registered XTT chassis JP750 with a February 2025 build date. The year on this profile describes the vehicle behind the offer. Source ↑
- Model year
- A different Australian owner identifies their Robson XTT 15YR Edition as a 2025 purchase. It corroborates the edition’s presence that year. Only the manufacturer’s offer and the register are used for JP750’s price and masses. Source ↑
- Category selection
- MDC describes an off-road six-berth camper trailer. Family is an editorial category based on the bed arrangement. Source ↑
- Sleeping places
- MDC states six sleeping places across a front queen, rear double and convertible lounge. Four people can use the two separate end beds while leaving the lounge intact. Source ↑
- Overall travel length
- The model specification labels 5,879 mm as the length in closed travel configuration. The canvas and both ends unfold at camp. Source ↑
- Published tare
- The register entry for LA97ADD19S0MJP750 records 1,733 kg tare. The model page quotes an approximate 1,740 kg guide figure. Source ↑
- Published ATM
- Registered ATM is 2,400 kg for JP750. The register separately gives 2,250 kg GTM. Source ↑
- Published ATM
- MDC’s edition specification also gives a 2,400 kg ATM. Source ↑
- Advertised price
- MDC advertised A$32,990 for VIN LA97ADD19S0MJP750 on 20 November 2026. Freight, registration and government charges are extra. The general model price starts at A$37,990. Confirm that the VIN is available and request the total for your address. Source ↑
- Equipment
- MDC lists both mattress sizes, a convertible lounge, an outside slide-out cooker, an ensuite tent, portable toilet and 200 Ah battery. Source ↑
- Published width
- MDC lists a closed travel width of 2,373 mm. Source ↑
- Travel height
- MDC lists a closed travel height of 1,711 mm. Source ↑
- Sleeping configuration
- Front queen (1,990 × 1,540 mm), rear double (1,990 × 1,300 mm) and convertible club lounge. The end beds can be used together once the camper is unfolded. Source ↑
