Model research
OPUS Expedition Pro Pop Top
Configuration: Expedition Pro Pop Top
The Australian gallery and 2026 handbook were checked. The Pro cabin close-up does not establish a Pop Top roof, and the identifiable gallery exteriors show the Hardside.
Who it may suit: Couples comparing space and storage needs. Confirm the exact floorplan for your household.
- Advertised price
- $69,990
- Layout
- Queen bed · Internal ensuite · External slide-out kitchen
- Berths
- 2
- Travel length
- 7,490 mm
- Published tare / ATM
- 2,400 kg / 3,000 kg
Price inclusions and conditions
OPUS’s Pro Pop Top trim card displayed A$69,990 on 19 November 2026. Enter your postcode for the tow-away figure and confirm the total with your selected options.
Price observation checked . Price source ↓
Reasons to consider
- A queen bed and internal ensuite sit alongside an outdoor slide-out kitchen in the specified pop-top trim.
Possible compromises
- The manufacturer gallery has not supplied an approved photograph of the exact pop-top exterior; the pictured equipment cannot establish its build year.
Ask the dealer: Can you provide current photos and a floor plan of the Expedition Pro Pop Top being quoted?
Check this configuration with the manufacturer ↗
Manufacturer information checked 2026-09-23. Research draft. This is not a stock listing, road test or towing assessment.
Read the sources & outstanding checks ↓Visual evidence
Take a closer look
Each view is tied to its manufacturer source.
Exact-model visual evidence has not yet been cleared for display.
The details that matter
Open your comparison →- Sleeping places in selected layout
- 2
Source and qualification
Capacity table: sleeps 2.
OPUS Expedition Pro model and trim specifications ↗PRO comparison column: up to 2.
OPUS hybrid comparison ↗- Overall travel length
- 7,490 mm
Source and qualification
GoRV reported 7.49 m overall, 5.00 m body length and 3.20 m travel height for the hardtop test vehicle. These dimensions refer to that roof configuration.
GoRV’s 2026 Expedition Pro hardtop test ↗The model FAQ specifies a shared 7.49 m footprint and chassis for the Pro Pop Top and Hardside. GoRV distinguishes 7.49 m overall from 5.00 m external body length on the Hardside. The shared footprint supports a nominal overall length for the standard Pop Top.
OPUS Expedition Pro roof-style FAQ and nominal footprint ↗- Published tare
- 2,400 kg
Source and qualification
Pop Top tare row: 2400 kg.
OPUS Expedition Pro model and trim specifications ↗PRO Pop Top comparison row: 2400 kg.
OPUS hybrid comparison ↗The live Australian trim card specifies approximately 2,400 kg tare for the Pro Pop Top.
OPUS Australia Expedition Pro Pop Top trim, current price and dimensions ↗- Published ATM
- 3,000 kg
Source and qualification
ATM row: 3000 kg.
OPUS Expedition Pro model and trim specifications ↗Page six prints a nominal 3,000 kg ATM for the Pro. Check the fitted van’s plate.
OPUS Australia Expedition owner’s handbook, 2026 edition, pages 5–6 ↗- Model year
- Not stated for this variant
Source and qualification
No confirmed field evidence recorded.
- Manufacturer
- OPUS
Source and qualification
No confirmed field evidence recorded.
- Variant / configuration
- Expedition Pro Pop Top
Source and qualification
The cover and page five identify Expedition Pro and the Pop Top option. The cover dates the handbook, and no model year is specified for this van.
OPUS Australia Expedition owner’s handbook, 2026 edition, pages 5–6 ↗- Advertised price (AUD)
- $69,990
Source and qualification
OPUS displayed A$67,500 for the Pop Top on 19 November 2026, plus on-road costs. Confirm options and showroom delivery in your quote.
OPUS Expedition Pro Pop Top trim, pricing and bed selection ↗OPUS’s Pro Pop Top trim card displayed A$69,990 on 19 November 2026. Enter your postcode for the tow-away figure and confirm the total with your selected options.
OPUS Australia Expedition Pro Pop Top trim, current price and dimensions ↗
OPUS’s Pro Pop Top trim card displayed A$69,990 on 19 November 2026. Enter your postcode for the tow-away figure and confirm the total with your selected options.
Published weights can be approximate or configuration dependent. Confirm the actual build, options and compliance plate. Travel length is kept separate from body or internal length.
Layout & equipment
- Queen bed
- Internal ensuite
- External slide-out kitchen
Source-linked layout checks
These descriptions belong to the cited floorplan or equipment list. Check which options are fitted to the van you inspect.
Additional source details
- Published towball weight
- 235 kg
Other reviewed OPUS models
Explore each exact configuration and its source notes. Models from the same manufacturer can differ in layout, weight and inclusions; these links do not establish equivalent specifications or towing suitability.
Know what you’re comparing
Sources & outstanding checks
Research status: Research draft. Source checks document what a publisher says; they are not independent measurements.
Configuration caveats and outstanding checks (4)
- The 2026 Australian owner’s handbook covers both roof styles of the Pro. Its edition date does not identify the model year of the Pop Top offered for sale.
- OPUS gives both Pro roof styles the same 7.49 m footprint. GoRV reports 7.49 m overall and a 5.00 m body for the Hardside. The handbook labels 7.49 m as body length. Measure your fitted van from coupling to rearmost accessory before booking storage.
- OPUS gives a 2.67 m Pop Top travel height and 2.48 m width online. Its handbook gives 2.60 m and 2.45 m respectively. Confirm the fitted van’s clearances before choosing a garage.
- The Pro gallery and handbook do not identify an exterior photograph of the Pop Top.
Earlier advertised-price observations (1)
- : Pop Top card: AUD 67500 plus on-road costs. Source ↑
- OPUS Expedition Pro model and trim specifications (opens new tab)
manufacturer · Checked 2026-09-23
- OPUS hybrid comparison (opens new tab)
manufacturer · Checked 2026-09-23
- OPUS Expedition Pro Pop Top trim, pricing and bed selection (opens new tab)
manufacturer · Checked 2026-11-19
- OPUS Australia Expedition owner’s handbook, 2026 edition, pages 5–6 (opens new tab)
manufacturer-manual · Checked 2026-11-19
- OPUS Australia Expedition Pro Pop Top trim, current price and dimensions (opens new tab)
manufacturer · Checked 2026-11-19
- GoRV’s 2026 Expedition Pro hardtop test (opens new tab)
independent-road-test · Checked 2026-11-19
View the field-by-field research notes
- identity
- Model heading and Pop Top trim identify this configuration. Source ↑
- Category selection
- Manufacturer positions this as a couples hybrid for off-road use; this is classification, not an independent capability assessment. Source ↑
- summary
- Layout and standard-equipment sections describe the bed, ensuite and external kitchen. Source ↑
- Equipment
- Standard-equipment list. Source ↑
- Sleeping places
- Capacity table: sleeps 2. Source ↑
- Sleeping places
- PRO comparison column: up to 2. Source ↑
- published Length
- The manufacturer lists 7.49 m as length. The handbook calls this body length, so overall towing length requires separate confirmation. Source ↑
- published Length
- The manufacturer lists 7.49 m as length. The handbook calls this body length, so overall towing length requires separate confirmation. Source ↑
- Published tare
- Pop Top tare row: 2400 kg. Source ↑
- Published tare
- PRO Pop Top comparison row: 2400 kg. Source ↑
- Published ATM
- ATM row: 3000 kg. Source ↑
- Advertised price
- Pop Top card: AUD 67500 plus on-road costs. Source ↑
- published Travel Height
- The Australian model page gives the Pop Top travel height as 2.67 m. The Expedition handbook states 2.60 m. Source ↑
- published Width
- The model lists 2.48 m width. The handbook gives 2.45 m travel width. Source ↑
- Published towball weight
- OPUS lists a 235 kg ball weight for the Pop Top. Loading conditions are unspecified. Confirm the ordered unit and its loaded measurement. Source ↑
- Advertised price
- OPUS displayed A$67,500 for the Pop Top on 19 November 2026, plus on-road costs. Confirm options and showroom delivery in your quote. Source ↑
- Variant
- The cover and page five identify Expedition Pro and the Pop Top option. The cover dates the handbook, and no model year is specified for this van. Source ↑
- published Length
- Page six uses the label “Body length” for 7,490 mm. It does not specify the endpoints of an overall travel measurement. Source ↑
- published Travel Height
- Page six lists both Pop Tops at 2,600 mm and both Hardsides at 3,200 mm. Source ↑
- published Width
- Page six lists 2,450 mm travel width for both models. Source ↑
- Published ATM
- Page six prints a nominal 3,000 kg ATM for the Pro. Check the fitted van’s plate. Source ↑
- Published tare
- The live Australian trim card specifies approximately 2,400 kg tare for the Pro Pop Top. Source ↑
- Advertised price
- OPUS’s Pro Pop Top trim card displayed A$69,990 on 19 November 2026. Enter your postcode for the tow-away figure and confirm the total with your selected options. Source ↑
- Overall travel length
- GoRV reported 7.49 m overall, 5.00 m body length and 3.20 m travel height for the hardtop test vehicle. These dimensions refer to that roof configuration. Source ↑
- Overall travel length
- The model FAQ specifies a shared 7.49 m footprint and chassis for the Pro Pop Top and Hardside. GoRV distinguishes 7.49 m overall from 5.00 m external body length on the Hardside. The shared footprint supports a nominal overall length for the standard Pop Top. Source ↑
