Sleeping layouts · 7 min read
Caravans with two double or queen beds: Australian layouts compared
Compare a hard-walled Bailey with two doubles, a Hardkorr camper with two queens, and the measured beds in the OPUS OP4 and MDC Robson XTT.
In brief
For two doubles inside a hard-walled caravan, Bailey’s Unicorn Series II Barcelona pairs a fixed rear bed with a front lounge that converts. For two queen beds side by side in the Xplorer 2.3 Family, Hardkorr uses a rooftop tent. The OPUS OP4 and MDC Robson XTT each put a folding bed at either end.
25-second illustrated guide · Bed arrangements are schematic. Confirm dimensions and clearances on the exact build.
Read the walkthrough
The OPUS OP4 Air folding camper opens a double bed at each end. Check the full camp footprint. The Crusader Lifechanger Bunkie MY26 uses a queen and two bunks. Try the ladder and night-time route to the bathroom. The Snowy River SRC-17 has a single island queen for two people. Check clearance beside the mattress and access to storage below.
Four berths does not mean two double beds
If you need two separate adult sleeping spaces, begin with the exact floorplan. A four-berth caravan might have one double bed and two bunks, one bed plus a converted dinette, or two larger sleeping areas. The berth total alone cannot distinguish these arrangements.
Write down who will sleep in each position and the minimum mattress dimensions they need. Ask whether both beds stay available together, whether each is rated for the intended occupants, and what changes between travelling, daytime and sleeping modes. Do not assume a caravan queen or double mattress matches the size you use at home.
A two-berth label likewise describes two sleeping places, not necessarily two separate beds. If two adults need their own beds, distinguish a twin-single layout from two double or queen beds before filtering by capacity.
Can two couples sleep inside a hard-walled caravan?
Bailey’s Unicorn Series II Barcelona is one example you can look for second-hand in Australia. The front lounge makes a double measuring about 206 × 160 cm. The rear double stays made and measures about 191 × 132 cm. Bailey gives the original dimensions in feet and inches on page 6 of its brochure.
Both beds fit inside the caravan body. Making the front bed uses the lounge seats, so a pair who like breakfast early should try reaching the kitchen with both beds made. An owner in Western Australia describes the front conversion on a 2013 Barcelona. For an inspection, match the floorplan and measure both mattresses on that individual van.
Source: Bailey of Bristol · Unicorn Series II Barcelona, December 2013 brochure, page 6
Source: Western Australian owner · 2013 Bailey Unicorn Barcelona front lounge conversion
Which camper has two queen beds?
Hardkorr’s Xplorer 2.3 Family sleeps four adults in a rooftop tent reached by built-in stairs. The two queen mattresses sit side by side, with a fabric divider between them. At an inspection, leave the divider down and try getting out of the farther bed while someone is asleep in the nearer one.
This is the earlier Xplorer 2.3 Family. Hardkorr lists the redesigned Series 4 separately. If a seller quotes a Series 4, ask for its own bed measurements and setup photographs.

Source: Hardkorr Campers · Xplorer 2.3 Family roof tent, access stairs and factory photographs
Source: Hardkorr Campers · separate Xplorer 2.3 Family Series 4 listing
Named layouts: what the source actually confirms
OPUS identifies both doubles by name. Jayco’s MY26 Outback Standard selector documents its sleeping positions but leaves both mattress dimensions unconfirmed. The Bunkie and SRC-17 show how different a berth total can look in practice. The Jayco, Crusader and Snowy River references below were examined on 7 November. The OPUS reference was checked on 19 November.
On smaller screens, move sideways through the table while keeping the model column in view.
| Model / reference | Published arrangement | Does this confirm two adult double beds? |
|---|---|---|
| Jayco Expanda 17.56-2.OB.EX-MY26 — Outback Standard, current selector reference | Manufacturer breakdown: four adults, two children and two additional places. Its linked illustration shows expanding bed ends, bunks and a dinette. | Not confirmed. The examined selector and illustration do not give both mattress dimensions. Ask for both sizes and simultaneous setup; eight stated places do not mean eight fixed beds. This reference is not a reviewed CaravanScout model profile. |
| Crusader Lifechanger Bunkie MY26 — standard four-place layout | One queen bed and two bunks. The manufacturer table lists the main bed as 6 ft 2 in × 5 ft 0 in and each bunk as 6 ft 0 in × 2 ft 2 in. | No. A queen plus two bunks is not two double beds. Confirm usable mattress sizes and occupant limits for your party. |
| Snowy River SRC-17 — SRC-2026 model reference | One queen island bed; two stated sleeping places. | No. Two berths refers to capacity here, not two separate double beds. |
| OPUS OP4 Air folding camper trailer | Two innerspring doubles at opposite ends of the opened camper. The lounge converts separately. | Yes for two manufacturer-described doubles. Confirm usable mattress dimensions, entry clearance and the open footprint. This example is a folding camper trailer. |
| 2023 OPUS OP4 Dual Folding, stock 128453 | Purple Line lists two fold-out double mattresses at 1,260 × 1,830 mm each. | Yes for two doubles. Both usable lengths are 1.83 m. Taller sleepers should try lying down before choosing this layout. |
| MDC Robson XTT 15 Year Anniversary Edition folding camper | The owner manual gives 1,990 × 1,540 mm for the front mattress and 1,990 × 1,300 mm for the rear. The lounge can also convert. | One queen and one double. Both mattresses are the same length, but the rear is 240 mm narrower. Check which end suits each pair. |
- See both mattress sizes, the factory photograph and 2023 price →
- Inspect the Robson XTT with the 1,540 mm front and 1,300 mm rear mattresses →
- Inspect the reviewed Bunkie layout and its qualifications →
- Inspect the reviewed SRC-17 couples layout →
Source: Crusader: MY26 Lifechanger Bunkie model and bed-size table (checked 7 November 2026)
Source: Snowy River: SRC-17 SRC-2026 layout reference (checked 7 November 2026)
Source: OPUS Australia · OP4 Air beds and camper setup, checked 19 November 2026
Source: MDC · Robson XTT 15 Year Anniversary Edition owner manual, mattress dimensions
Source: Purple Line · 2023 OP4 Dual Folding, stock 128453 and mattress sizes
Source: MDC · Robson XTT 15 Year Anniversary Edition, beds and VIN-specific offer
Three layouts worth investigating
Expanding bed ends can move sleeping space beyond the travelling body. A fixed bed plus a convertible lounge can create a second sleeping area inside. A purpose-designed twin-bedroom layout can offer a different level of separation, but needs its own model-by-model research.
Jayco’s current Expanda Pop Top selector identifies the 17.56-2.OB.EX-MY26 Outback Standard and separates adult, child and additional places. Its linked illustration shows expanding bed ends together with bunks and a dinette. This is a useful exact configuration to investigate, but a headline sleeping total and an unscaled illustration do not establish that both end mattresses are adult doubles or queens of the dimensions you need. Confirm both sizes and the supplied configuration with Jayco.
| Arrangement | Potential benefit | Questions before shortlisting |
|---|---|---|
| Two expanding bed ends | Sleeping space outside the travel-body footprint | What are both mattress sizes? Can you use them in the intended weather? |
| Fixed bed plus dinette conversion | A second sleeping area using daytime furniture | Is it adult-sized? Where are cushions and the table stored? |
| Two separate bedrooms | More separation between sleeping parties | Does each room contain the bed type required? How much living area remains? |
| Double bed plus bunks | Separate places for a family | Are bunks suitable for the people travelling? This is not two double beds. |
Source: Jayco Australia: Expanda layout and expandable bed ends
Inspect both beds in the same visit
Ask the supplier to set up every sleeping position at once. Measure each mattress, try entry and exit, and check ventilation, lighting and access to the bathroom. With expanding ends, inspect the opening sequence, weather protection and how the bed closes for travel.
Then ask to see the daytime arrangement. If someone stays in bed, can the other travellers eat, sit or reach the kitchen? Check where bedding lives during the day and whether storage can be opened with beds made up. These are practical differences a brochure capacity cannot answer.
- Record the exact layout code and both mattress measurements.
- Confirm which sleeping spaces are fixed, expanding or converted.
- Check occupant limits and safe-use guidance with the manufacturer.
- Measure the fully opened camp footprint as well as travel dimensions.
- Compare the complete quoted build and its documented weights.
Use the directory as a starting list
Our family and sleeping-capacity filters can help find models to investigate, but we do not currently have a verified two-double-bed filter. Treat a four-place result as a candidate for closer floorplan checks, rather than proof that it has two adult double beds.
Save promising models, compare their configuration notes and ask the supplier to confirm the sleeping arrangement in writing. The ACCC’s new-caravan guidance is a useful reference for checking supplier claims and understanding the information to collect before a purchase.
